How to Redeploy Edge Gateway

If Edge Gateway is not working correctly, when you change Edge Gateway or VDC Network settings, you see Networking Operation Failed: Configuration failed on NSX Edge VM vm-952625. Kindly refer Edge and NSX Manager logs for more details. Root Cause: File system in read only mode. Command execution failed: config, run Redeploy Edge Gateway:

 

  1. Go to Networking.
  2. Select the Edge Gateway tab.
  3. Select the Edge Gateway checkbox.
  4. Click Redeploy

 

During Redeploy, the Edge Gateway will be unavailable for management, no traffic will pass through the Edge Gateway.

The estimated time of Redeploy is 5 minutes.

 

Have you tried Cloud4U cloud services? Not yet?

Go to the Main Website

Try for free

  • Edge, edge gateway, redeploy
  • 4 Users Found This Useful
Was this answer helpful?

Related Articles

Hairpin NAT on the Edge Gateway

Hairpin NAT can be used to access a host behind a NAT while also being behind that same NAT....

Diagnosing Network Connections on an EDGE Virtual Router (Part 1)

Sometimes you may have problems configuring the virtual router when port forwarding is not...

Diagnostics of network connections on a virtual EDGE router (Part 2)

In this article, we will consider the possibility of capturing network packets on EDGE with its...

Load balancing with advanced edge

A load balancer built into the advanced edge accepts UDP, TCP, HTTP, HTTPS requests and...

Network configuration of VMware infrastructure (NAT, DHCP, Firewall, Static Routing, VPN)

Network configuration of VMware infrastructure (NAT, DHCP, Firewall, Static Routing, VPN)....